Contact Us

Address: NO.22, Zhuwen Road, Zhutang Town, Jiangyin City, Jiangsu Province, China

Tel: +86-510-86175601-8500

Fax: +86-510-86382925

Mob: +8615852606969

E-mail: molly.wang@hygrade.com.cn

E-mail: sales@hygrade.com.cn

Home > News > Content
The Main Work Flow Of The Steel Wire Reeling Machine Nov 14, 2017

In the actual work, with the operation of the steel wire reeling machine, the diameter of the steel coil is changing constantly, so that the  batching speed will inevitably change. However, in order to ensure the processing quality of the products, it is necessary to maintain the balance between the batching speed and the rolling speed, and keep the tension constant during the rolling of the strip.


In order to achieve such a request, then the steel wire reeling machine must be designed as a device which can adjust the speed. In other words, its speed range also needs to adapt to the change of rolling speed and the change of steel coil diameter. For this reason, the adjustable speed DC motor transmission is usually adopted. In addition, after the completion of rolling, the steel coil needs to be removed from the drum, so its drum must be made into the cantilever type.


At the same time, we must also take into account its force. This is because in the batching process, it often needs to bear greater tension, so the drum shaft has to bear a large load. If you want to ensure the rigidity and strength of the  drum shaft, avoid bending problems as much as possible, you not only need to increase its size, but also need to set a rotatable support at the free end of the drum.


In this way, not only the batching work can be completed smoothly, but also in the process of unloading will not be hindered by other factors. It should be noted that, in general, the steel wire reeling machine bear the larger torque in the running process, or the obvious vibration, so the transmission system may occur faults.


Aimed at such problems, we can use the polymer based composites to repair. Using this method will not be affected by the thermal stress of repair welding, and can repair different thickness. At the same time, it can absorb the impact vibration of the steel wire reeling machine, and play the role of preventing re-wear.